The Integrated Power System (IPS) is a unique multifunction power supply which incorporates built-in battery back-up and numerous power accessories within a single 2RU (3.5") chassis, thus eliminating time-consuming system integration, component sourcing and installation, while saving precious rack space--ideal for any low-to-medium power application requiring AC fault tolerant operation.
A precision regulated power supply/charger, back-up battery, low voltage battery disconnect, output metering, LED status and Form C alarm contacts are all pre-wired and calibrated within the unit for plug-and-play operation. Plug-in terminals are provided for easy wiring of an additional parallel rectifier input, or external batteries for increased back-up capacity.
The batteries are always in-line with the load, thus there is no interruption from relays or transfer switches in the event of AC loss. Batteries are recharged when AC is restored. A manual battery disconnect switch allows internal or external battery service or replacement while the system is running. Models available for -48, +24 and +12 volt applications.
Features
• Precision regulated power supply simultaneously maintains batteries at peak charge and supplies
system load.
• Built-in batteries instantly power load during AC failure--no switch-over delay. 3-5 year average life.
Terminals provided for additional external batteries for increased back-up capacity.
• Terminals provided for easy addition of parallel rectifier. (48V and 24V models only)
• Automatic low voltage and manual battery disconnect.
• Numerous front panel monitors--L.E.D. status indicators and digital ammeter/voltmeter.
• Form C summary failure alarm contacts; loss of internal rectifier output, loss of external rectifier
output, LVBD contactor open. AC input failure alarm contacts optional.
• Numerous protection features--AC input breaker, internal battery breaker, auto thermal
shutdown/recovery, current-limiting, short-circuit and over-voltage protection.
• 19" or 23", 6” forward rackmount brackets provided
Specifications
|
Model
|
Input Amps
@ Full Load 115 / 230 |
VDC
|
Output
Adjustment Range |
Amps
Continuous |
Internal
Battery Capacity |
Ground
Reference |
Weight
Lbs. |
|
IPS 48-11
|
11 / 5.5
|
54.4
|
40-60 VDC
|
11
|
5 A-H
|
Positive
|
33
|
|
IPS 24-22
|
11 / 5.5
|
27.2
|
20-30 VDC
|
22
|
10 A-H
|
Negative
|
33
|
|
IPS 12-40
|
11 / 5.5
|
13.6
|
10-15 VDC
|
40
|
20 A-H
|
Negative
|
33
|
AC Input
Input Range (switch selectable):
115V = 92-130 VAC
230V = 184-260 VAC
Frequency:47-63 Hz
DC Output
Voltage: See Matrix above
Adjustment Range: See Matrix above
Amps Continuous: See Matrix above
Maximum Load with External Rectifier and Battery Inputs: 40 amps
Regulation: Line: ± 1 %
Load: ± 2 %
Ripple: ± 1 %
Environmental
Temperature Rating: -10° to + 60° C; Derate linearly from 100% load @ 50° C to 75% @ 60° C
Mechanical
Chassis: Aluminum
Rack Size: 19" or 23", 2 RU (3.5")
Cooling: Forced Air
Dimensions: 3.5"H x 17"W x 18"D
Weight: 33 Lbs. (with batteries), 17 Lbs. (without batteries)
Protection
• Current Limit, Short Circuit
• Over Voltage
• Auto Thermal Shutdown/Recovery
• Input Fuse and Circuit Breaker
• Circuit Breaker For Internal Battery
• Low Voltage Battery Disconnect (Adjustable)
Internal Batteries
Type: 12 Volt, 5 A-H Sealed Lead-Acid, Maintenance-Free
Amp-Hour Capacity: See Matrix below
Weight: 4 Lbs. each; 4 Batteries per Unit
Approvals: UL Recognized, DOT and IATA, approved for shipment by air
|
Internal Battery
Constant Current Performance (Amps) to 1.75 VPC |
|||||
|
MODEL
|
5 MIN.
|
15 MIN.
|
30 MIN.
|
1 HR.
|
2 HRS.
|
|
IPS 48-11
|
15.0
|
8.0
|
5.0
|
3.0
|
2.0
|
|
IPS 24-22
|
30.0
|
16.0
|
10.0
|
6.0
|
4.0
|
|
IPS 12-40
|
40.0
|
32.0
|
20.0
|
12.0
|
8.0
|
Indicators and Alarms
System "Nominal" indicator lights:
• AC OK
• External Rectifier ON/OK*
*Except IPS-12-40
• Internal Rectifier On/OK
• Battery Contactor Closed
System "Warning" indicator lights:
• Check System
• Battery Disconnected
Form C Alarm Contacts:
• Summary Failure
• AC Input Failure (Optional)
Options
External Rectifier: 24V, 48V only; 500 or 1,000 watt (see PM Series)
AC Input Fail Contacts - Specify 115 or 230 VAC
Rectifier/Battery Input Cable Assembly (Model CA-24)
Rear Support Bracket for Flush Mounting Models: RSB-19 or RSB-23
Distribution Panel Models: DST-10 (UL), DST-20A (UL)
Unit Supplied Without Batteries
| Request Evaluation Sample |