DC-DC Converters
DC-DC
Voltage/Power Range: 12, 24, 48, 72, 110 VDC Input, 12 or 24 VDC Output,
3 - 50 Amps
Configurations: Isolated/Non-Isolated, Step-Up, Step-Down, Stabilizers, Battery Charger,
Rack Mount, Mobile, Wall Mount, Desktop
Rack Mount
Rackmount DC Converter
Input: 24 or 48 VDC
Output: 12, 24, or 48 VDC,
15 - 30 Amps
Communication sites require isolated DC Converters to provide excellent voltage regulation, low noise, and high efficiency voltage conversion. Reliability is vital under continuous duty operation and high ambient temperatures.
These units accept a wide input range at 24 or 48 VDC nominal, positive or negative ground, and produce pure 12, 24, or 48 volt power. The solid state circuitry is conservatively designed and semi-conductors are selected and tested to withstand 200% of normal operating power.
Learn More About the Rackmount DC-DC Converter Series
Mobile Mount
Standard Series
Input: 24 or 48 VDC,
Negative Ground
Output: 12 or 24 VDC,
3 - 50 Amps
Convert 20-50 VDC input to 12 or 24 VDC negative ground output for powering communication/navigation equipment, on negative ground systems. (see Isolated series for positive ground applications.) Ideal for powering voice and data transceivers in mobile applications.
Learn More About the Standard Series DC Converters
Isolated & Spike Protected Series
Input: 24, 36, 48, 72 or 110 VDC,
Positive or Negative Ground
Output: 12 or 24 VDC,
6 - 35 Amps
Isolated and Spike protected series converters offer the benefits of an isolated converter plus protection against line transients and voltage spikes typically caused by large DC motors and switching transients often encountered on forklifts, locomotives and light rail applications. A transient energy circuit clamps input spikes to a safe level, protecting both the converter and the powered equipment. Rugged case construction and internal components designed for severe vibration applications.
Learn More About the Isolated and ISP Series DC Converters
Voltage Stabilizers, Mobile Mount
Stabilizer Series
Input: 12 or 24
Positive or Negative Ground
Input Output
12 to 12
24 to 24
3 - 35 Amps
Feed sensitive electronics with proper voltage regardless of battery condition. These stabilizing converters provide continuous, precisely regulated output over the entire range of a battery's usable voltage. This prevents subjecting loads to fluctuating input voltage which can cause shutdown, diminish performance and possibly damage sensitive circuitry.
Learn More About DC Power Stabilizers
Isolated Series
Input: 12, 24 or 48 VDC,
Positive or Negative Ground
Output: 12 or 24 VDC,
3 - 35 Amps
This series provides voltage conversion as well as input/output isolation, allowing use of negative ground electronics on off-highway vehicles which typically employ positive ground battery systems. May also be used as a voltage stabilizer and filter for sensitive equipment.
Learn More About the Isolated DC Converter Series
Home