Unity Rectifier System

The Unity Rectifier System comprises a low profile 1.75" (1 RU) shelf which accommodates up to three 150 watt,-48 or +24 volt hot-swap rectifiers, plus an optional distribution panel which contains five individually fuse-protected circuits. The system is scalable/adaptable for N, N+1 or N+2 configurations. Front panel test points and voltage adjustment pot are provided for fine-tuning output to the requirements of sensitive loads and to optimize load sharing. Form C status contacts enable remote alarms for the rectifiers and fuse distribution circuits. Front panel OK/FAIL LED's allow monitoring status of each rectifier individually. The optional power distribution module employs industry standard GMT fuses, configured with alarm contacts and a front panel "BLOWN FUSE" LED indicator.

Site Power System

The Site Power System (SPS) series provides a complete DC power solution that integrates quickly with batteries, loads, and monitors. Available in 12, 24 and -48 volt configurations, the compact 300 watt assembly contains: power supply with temperature compensated, automatic boost/float battery charge cycle; low voltage disconnect; and programmable alarm contacts, all in a compact case.

The Centurion Rectifier System

Centurion - Medium Power - 550 Watts/Rectifier
The Centurion Rectifier System comprises a low profile 3.5” (2 RU) shelf which accommodates up to three 550 watt, -48 or +24 volt hot-swap rectifiers, plus a voltage control and alarm module. The system is scalable/adaptable for N, N+1 or N+2 configurations. And is ideal for powering network transmitters.

High Power 1600 Watts/Rectifier

The NCPS6000 Power System is intended for operation as a battery reserve system and supports up to four battery strings. Battery management features such as slope thermal compensation, low-voltage disconnect, battery high temperature alarm and battery shorted cell detection are available.

Power Module

These Versatile Rectifier Modules function as either power supplies or battery chargers for 12, 24 or 48 volt systems; positive, negative or floating ground. They may be employed singly or in combination, enabling the installer to scale the system anywhere from 500 to 10,000 watts per rack. Units may be paralleled for N + 1 redundancy and alarm contacts allow local or remote monitoring. An optional DC quick connect wiring kit allows easy replacement of modules without system shutdown.

Power Modules may be used separately as a power source, or they may be integrated with the Power Function Manager to greatly expand the system capability with other functions such as digital output monitoring, powering multiple loads via circuit breaker distribution and low voltage battery disconnect.

Power Function Manager

The Power Function Manager (PFM-400) is a system integrating component which converts ordinary power supplies (or Power Modules) into a fully integrated and multifunctional power system. The unit provides for control, monitoring, paralleling and protection of 12, 24 or 48 VDC, positive negative or floating ground power sources.

Integrated Power System

The Integrated Power System (IPS) is a unique multifunction power supply which incorporates built-in battery back-up and numerous power accessories within a single 2RU (3.5") chassis, thus eliminating time-consuming system integration, component sourcing and installation, while saving precious rack space--ideal for any low-to-medium power application requiring AC fault tolerant operation.