Power Plant Accessories

Battery Disconnect Panels • Provides over-current protection in high current battery wiring   applications • Provides a convenient means of disconnecting batteries   from power plant during servicing • High current single pole breaker is mounted into dedicated   black finish panel • Auxiliary contacts standard (form C) • Adapts for 19" or 23" racks. • Voltage Rating: 12, 24 or 48 VDC Model Circuit Breaker Available Position Amperage BDP-1 1 50, 75, 100 BDP-2 2 50, 75, 100 Special order 125 to 400 amp panels available - contact factory
Bus Bars • 800 amp rated nickel-plated copper bus bar for use as heavy   duty DC positive or negative connection point in rack   installations • Mounts to rear of rack; adaptable to 19" or 23" rack widths • All mounting hardware including isolated stand-offs provided • Multiple attachment holes in two sizes provided for single and   dual hole lugs:   18 ea. @ .312" x .500"   6 ea. @ .437" round   4 ea. @ .281" round • Bar is 2" high x 1/4" thick x 19 1/2" wide, 4 lbs. • Projection depth from rear of rack: 7 1/2 inches Model: BBA-800
DC Quick Connect Wiring Kits • Allow for quick installation and removal of rectifiers • Designed specifically for use with NEWMAR PM Series   Power Modules and Power Function Manager in stacked rack   configuration. • Wiring harness is fitted with “Anderson” quick-connect and   ring lug terminals; all wires tie-wrapped into proper position   for quick and easy installation. • Simplifies parallel wiring of up to 6 modules • Facilitates "hot" change-out of modules without system   shutdown • Wire gauge 6 AWG Models: QCK-3 for 2-3 Power Modules; 3 lbs. QCK-6 for up to 6 Power Modules; 4 lbs. CCK-4 for up to 4 Power Modules (2200 Watt) 6 lbs.
Rear Rack Covers • Clear plastic panels attach to rear of racks to protect service   personnel by preventing accidental contact with "live"  terminals,   etc., from top, sides and rear. • Holes in rear panels allow for flow-through ventilation of   fan-cooled components • Model indicates height of cover in rack units and rack width   in inches:   RRC-3-19 3 RU, 19" rack   RRC-7-19 7 RU, 19" rack   RRC-3-23 3 RU, 23" rack   RRC-7-23 7 RU, 23" rack • May be installed at 14" or 17" rear depth • Multiple covers may be stacked to accommodate   system height • All mounting hardware included • Weight: 2 lbs. Special 2RU rear cover also available for DST panels
Relay Racks • 7' X 19" or 23" black painted racks constructed of high   strength aluminum. Self supporting with two top angles   for additional mounting points/additional strength. 19”   rated to 1,000 lbs., 23” rated to 1,500 lbs. • 5/8" - 5/8" - 1/2" mounting hole pattern. Compatible with   conventional EIA 1 1/4" -1/2" alternating hole patterns. • Six web channels per side for side-by-side rack installations. • Includes 50 ea. #12-24 mounting screws. • Shipped unassembled with assembly instructions. • Weight: 19” - 32 lbs., 23” - 42 lbs. Cabinets are also available in various configurations. Contact factory and specify requirements.
Electrical System Analyzer An essential tool for any electrical system installer or site maintenance technician, the Electrical System Analyzer provides extremely accurate data on all major AC and DC electrical functions in a convenient hand-held device with large easy-to-read LCD display. Measures and displays: • AC Voltage up to 400 VAC • DC Voltage up to 400 VDC • AC Current up to 200 Amps • DC Current up to 200 Amps • Frequency at 50-100,000 Hz • Electrical Continuity • Electrical Resistance 40-400 Ohms Features • Clamping sensor allows current measurement without   disconnecting wiring or shunt installation • Long easy-grip color coded needle-type test probes • Operates on two AA batteries (provided) • Protective carry-case included Model: ESA

Download PDF Data Sheet