Sentinel Rectifier System

Incredible Functionality, and Scalability in a 1 RU, 600 Watt to 1.8 Kw DC Power System

• 19", 1U rackmount shelf with integrated power distribution and SNMP digital controller
• 90-250 VAC input, power factor corrected
• 3 power bays accept 600 watt modular rectifiers, -48V
• 33 amp, 1800 watt total max. output capacity
• Output temperature compensated for precise battery charging
• 4 DC circuit breaker distribution capacity, with tripped breaker alarm
• Master disconnect breaker for two battery banks, with tripped breaker alarm
• Controller with digital display of system parameters with TCP/IP interface and SNMP
   monitoring/logging
• Alarm contacts monitor major system functions
• Low voltage disconnect built-in
• Easily configures to meet site power requirements

Complete system design and integration by Newmar to your application parameters: Rectifier configuration, installation of distribution circuit breakers, and configuration of alarms and monitors. Assembly in a relay rack with batteries and wiring also available. Let us submit a proposal on your next project.

Specifications: Centurion

AC Input:

Nominal: 115 or 230VAC
Voltage Range: 90-300V
Frequency Range: 45-65 Hz
Power Factor: >0.99
Efficiency: >92% (>50% output power)

DC Output:

Voltage: -48 Volt
Output Ratings: Constant Power Output From 54V To 58V
Nominal Voltage:48V
Rated Voltage: 54V

Power:

Rated maximum System Output Power: 1800W @ 54V
Polarity: Positive Earth. 48 Volt
Individual Rectifier Power: 600 Watt
Amperage @ 115 or 230 VAC in 4.2

DC Distribution:

Load: 4 breaker positon capacity, available amperages (specify) 6A, 10A, 20A, 30 amp, with 
tripped breaker alarm
Battery: 2 x 30A battery circuit breakers.
Breaker Fail Detection: Electronic fail detection on both load and battery. Breakers
Low Voltage Battery Disconnect: 80A battery LVD installed standard, with disconnect alarm

Monitoring & Control:

Monitors all power system conditions including DC voltage, rectifier current, battery current, battery temperature, and distribution failure. Visual notification of alarm conditions by LED's and a 4 line x 16 character alpha numeric display mounted on the front panel, with remote notification being enabled by relay contacts, RS232 or TCP/IP (using SNMP). It has a built-in web based configurator allowing setup of system parameters using a web browser and utilizes a USB communications port which allows for local monitoring of system operations as well as easy downloading of configuration files for multiple site installations.

General System

Protection:

Current Limit: Adjustable to 50-100% of maximum rated current.
Over Temperature: Automatic current reduction, backup shutdown protection.
Polarity Reversal: Output fuse with crowbar diode.
Over Voltage: Adjustable limit.
Input Voltage: Auto shutdown, auto restart when correct voltage restored.
Input Inrush: <2x maximum input current.
Input Fuses: In phase and neutral.

Technical Characteristics:

Noise: Ripple <100Hz: <1mV rms unweighted
Voice band 100Hz-5KHz: <2mV rms psophometric
Wide band 5kHz-1MHz: <5mV rms unweighted
Peak to Peak 0-20MHz: <50mV peak to peak
Isolation: Input to Output: 4000V DC.
Input to Chassis: 3500V DC (VDR to chassis removed)
Output to Chassis: 2100V DC
Regulation: Line = ±0.1%, Load = ±0.5% (no load to full load)

Mechanical:

Shelf: Dimensions: 19" W x 1.75" H x 10.2" D
Weight: 19.84 Lbs. (excluding rectifier modules)
Rectifers: Dimensions 2.2" W x 1.7" W x 9.25" D
Weight: 1.7 Lbs
Cooling: Forced cooled

Environmental

Ambient Temperature: Nominal:
Range: -20º C to +70º C (maximum output power is derated above +50º C)
Humidity: 0-98% RH (non-condensing)
Altitude: <3,000 M., De-rate maximum ambient temperature by 4º C per 1,000 M. above sea level.

Compliances:

Safety: EN60950
Electrostatic Discharge: CISPR24
Radiated Radio Freq: CISPR22
AC Harmonics: EN61000-3-2
AC Flicker & Fluctuation: EN61000-3-3
Other: CE & RoHS compliant